Over the years, I’ve come across some interesting money saving tips for your home while working with home owners.
These tips will help you cut back spending while actively trying to maintain a healthy, stress-free lifestyle, enjoying your home, and sustains our planet’s ecology, you’d agree.
1. Store Your Vacuum Correctly
The number one reason home owners sneeze and cough whilst vacuuming is because they stored their vacuum in the cupboard without emptying the bag after use.
Store your vacuum after cleaning it. Over time, mould, mildew, bacteria, dust mites and more, are sure to multiply. If you do this, you will avoid breathing in these biological contaminants, which can be more beneficial and healthy for you.
2. Use an Allergy Cover with Your Pillow
Allergy covers maintain the cleanliness in the pillow, they keep dust mites out, and they help detract bacteria and mould from your sweat. If you ONLY use an allergy cover on your pillow, it helps you stop breathing in dust mites – especially if you are sensitive to them.
If you open up the windows and blinds, you can crank up the air flow and natural light to the desired drier humidity, keep the bedding open, then snuggle and breathe more comfortably at night. It’ll reduce the dust mite numbers and activity and make your sleeping all the more healthy.
Allergy Covers
Bonus: If you don’t feel like breathing in dust mites every night, then you can invest in covers for your mattress and doona. They are easy to put on and cost much less in the short term, health wise.
Watch this video to show you how to use dust mite covers.
CLICK HERE to learn more
3. Use Baking Soda Instead of Cleaners
Baking soda will increase your indoor air quality. However, is it really a good cleaner? That would depend on what surface you’re trying to clean and how long it’s been unclean for. I would use baking soda at every surface clean and not wait for the dirt to become baked on or ground in.
Baking soda is also more “sprinkle” than your standard deodoriser. This may cause your carpets and rugs to be “snow like” in appearance for a three days. Just generous amounts to remove that musty smell carpets have if not cleaned properly.
Clean fridge, pantry and storage cupboards. You might find that your food will last longer and keeping pests at bay is cleaner.
4. Close the Gaps Around Building Yourself
It can cost you a bit of time and energy to close gaps around the building! Of course, that depends on how big your home or space is. The best thing you can do is learn how to close gaps around your building yourself.
1. Check one room at a time
2. Feel for drafts along the skirting board, above and below the board
3. Feel for drafts along the ceiling, cornices and walls
4. Identify the places with a pencil mark that can easily be removed
5. Remove all the items and clutter from the indicated areas and tidy up
6. Repair gaps and seal
7. Feel for drafts along doors, exterior and interior
8. Install door stoppers [link to a door stopper supplier in Australia / NZ ? mat website?]
9. Feel for drafts along windows and frames
10. Repair cracked glass by engaging a professional who more than likely will advise how to repair draft producing frame work
11. Bog up deteriorated frames. You can find this product in any hardware store (I don’t get paid for that endorsement, it’s just a really neat product) (?Bog off or ? link Bunnings)
12. Check drafts entering through the floor from the sub floor cavity. Timber floors are great at allowing air to enter the home and the type of floor covering will determine the amount of air flow in. Drape rugs over the floor and reduce drafts
13. Check drafts entering the roof and wall cavities. Encourage air flow. Repair broken tiles and plasters with the help of professional tilers and builders when you need a helping hand.
That’s it! It’s very simple and doesn’t require any special technique. There are professionals who can help you at each issue.
Roof Damage
The roof over your head protects your building from any kind of weather. If a roof is allowed to leak long enough, materials potentially deteriorate and structural damage is likely to result.
CLICK HERE to learn more
5. Keep Your Indoor Mould Free During Winter
Most indoor spaces, when opened up in the spring, look like the black lagoon. This will cause some occupants to dump a ton of chemicals in the air just to clear it.
NOTE: Indoor spaces with dehumidifiers do not have to worry about this. Their spaces are nearly always clear of mould.
Throughout the winter, make sure you use a microfibre cloth and dry the condensation off the surfaces of your windows and frames, and bathroom surfaces. [Link to window squeegee online Karcher window cleaner notes] Every time it rains or the storms have damaged tiles and let water in, tend to your repairs immediately and get that water dried off within 36 hours. I am so adamant about this as 80% of my work as a Building Biologist is mould from a water leak that should have been fixed at the time.
When the materials are dry, use a microfibre cloth and get as much dust and debris off the top of these hard surfaces as you can.
Come spring time you will thank yourself for keeping your indoors clean. It will be much easier to open the doors and windows and take a deep breath and you’ll be able to pat yourself on the back. No one wants to spend these new, fresh days in spring cleaning now do they!
6. Run Your Heating Ventilation and Air Conditioning Filter Less in Mild Climates
During the hottest part of the summer, I always recommend owners run their HVAC for 10 to 12 hours a day. You need to keep that air clean and moving so that you don’t run into any problems, such as mould growth in the unit itself. Mould loves warm, moist air.
When the air is colder, it’s harder for mould to grow. This is a good reason why you are able to get away with running your HVAC less when we have milder (cooler) weather.
So you can either cut back that HVAC to only running 6 hours a day, or invest in a radiant heater that uses less energy.
7. Buy Your Cleaning Products in Bulk
Make sure you buy your cleaning products in bulk at the beginning of the season whether it’s on sale or not. Stock up on Cornwell’s Fermented White Vinegar [link to naturally home] (or whichever cleaner you use) and Bicarb soda [link] since you’ll be using these products all year round.
8. Run Your Dehumidifier At Night
The peak hours for most electric companies are from 7:00am to 7:00pm during the week. This is when it costs the most money to use electricity.
To save some green, run your filter during the off-peak hours.
9. Purify You Indoor Air Every Week
Let’s say it’s the middle of the summer and you’ve been good at purifying your space every week. Your space has been crystal clear all summer long. You’ve been testing your air regularly and everything is going perfectly!
How to test indoor air
It’s important to learn how to test indoor air quality and do it at least once a week to make sure the air you breathe is pleasant, and to keep your health level in check.
CLICK HERE to learn more
Then, you decide that you’ve been so good that you’ll skip a week taking care of it. Remember, now it’s hot and the windows and doors are open to the weather. All of the sudden your space turns pollinated, polluted and / or dusty.
Now instead of following your normal routine and air purifying it once a week, you are forced to triple purify it this week to get rid of the contaminants. And you also have to run your filter system 24/7 to help clear up the dusty air. Now you have just wasted all that extra money into electricity pumping more purified air into your space and running the filter longer.
In short, purifying your space every week helps maintain a healthy and fresh building, which will prevent these kinds of things from happening.
How Do I Fix Contaminated Air
When you have contaminated indoor air, it can be a challenging and time-consuming process to get it clear and fresh again. Sometimes your room can turn polluted within seconds!
CLICK HERE to learn more
10. Use A Robotic Floor Cleaner
Robotic floor cleaners are self-contained units that run off of electricity and can clean an entire room faster than YOU. They sweep around the rooms on their own, gently bouncing off obstacles and collecting all kinds of debris in their containers.
These cleaners capture large dust particles, before they break down into smaller particles, so by running your robotic cleaner, you are actually saving money while keeping your room clean. It costs much less to run a small room cleaner than it does to run your vacuum system.
11. Keep an Eye On Your Indoor Air Balance?
For those of you who don’t know, balancing your indoor air means keeping the temperature of the air just right for humans, animals and the environment. When you add people breathing to your air and It’s important to keep your nose and senses on your carbon dioxide and particulate matter changes – at least daily until you’ve gained a sense on how your indoor air works – by using yourself as the tester.
For those of you who don’t know, chlorine stabilizer or cyanuric acid is a chemical that protects the sun from eating up the chlorine you put in your pool. When you add chlorine to your pool via shock or chlorine tablets, the chlorine is un-stabilized (for the most part). Meaning, it doesn’t last very long in the water to fight bacteria and other harmful contaminates.
By adding ventilation and air flow to your air, it will help keep that carbon dioxide and particulates in your air to more manageable levels to provide what it needs to keep your air fresh and healthy. Carbon dioxide is diffused and particulates are quickly carried away by air flow and the ventilation helps protect the indoor spaces from being polluted quickly.
Save Money By Not Wasting Water
Water isn’t free, nor is there an infinite supply of it in the world, especially as droughts have become increasingly common and severe in recent years. While most pool owners live in places where a simple turn of the tap releases a seemingly limitless flow of the wet stuff, the fact of the matter is that water is worth conserving- and so is money.
The average building wastes water in four ways:
- leaks
- flushing old pipes to collect contaminant free water prior to drinking and cooking
- waiting for warm water to kick in prior to showering or washing up
- flushing toilets
Not to mention in some homes:
- dish washers
- watering the garden, and evaporation
- filling up pools and spa baths, and evaporation
- While the water wasted at any given moment may be small and seemingly insignificant, it all adds up. It adds up to thousands of wasted litres, which can translate to hundreds of wasted dollars.
1. Find and Fix Leaks
It’s estimated that somewhere around 30% of pools have leaks. Leaks from plumbing, deteriorated tiling, water proofing and building materials, HVAC and dehumidifier systems, adverse flooding or occupant behaviour. Most leaks are small and minor, but every drop that drips out is one that has to be fixed at the trigger. To check for leaks, simply dry wet areas. If the water returns in 24 hours, there is likely a leak.
Leaks should be repaired by plumbing professionals as soon as they are discovered. It may be an initial expense, but it will be worth it in the long run, in water savings, for the life expectancy of the building materials and for the health of the occupants.
2. Don’t Flush Your Old Pipes Too Much
The average two-minute flush for a typical older style building costs the home owner around 200 litres of water per year. That’s not to say you shouldn’t flush, but the manner in which you address the flush can be used to your advantage.
First, never backwash for longer than necessary. The moment the water runs clear, stop. Next, install a water filter at the kitchen or main drinking/water collecting faucet that is suitable to remove contaminants for your home and area where you live. The more pollutants you force through the filter, the less frequently you’ll have to flush. Conscientious maintenance is the key.
3. Limit Waiting for Hot Water to Kick In
Running water for the sake of running water is the silent, invisible water-waster that plagues every building owner, but more so in some buildings than others. A hot water service located away from the wet areas such as the shower, bathroom, kitchen and laundry wastes about 7 litres at a time, or 2,530 litres annually per person per shower. Where there are large numbers of indoor occupants, big families, an average building can lose up to 20,000 litres in a household of four occupants – all for the sake of waiting for hot water to kick in. Those numbers are nothing to sneeze at.
To fight this phenomena, make sure your hot water service is located in close proximity to the shower and bathroom. A simple booster or extra solar panel is all that’s needed to save precious litres. Move the hot water service closer, is also an excellent measure.
Lastly, any temperature adjustments that can be checked and measured in hot water supply will cut down on water wastage, which can be accelerated by switching to a more amicable temperature. By reducing expectations can serve double duty in both fighting water wastage and wasting time.
If you are renting or simply visiting, how can you reduce this water wastage? Capture the first cold litres of water in a bucket. Simply place it under the shower head. And your garden or even that little pot plant will love you for it!
4. Minimise Flushing Toilets
Admittedly, flushing toilets is usually the result of our behaviour to be clean and sanitary. You can argue that clean and sanitary are the whole point to toilet practices and therefore flushing is to be expected. However, the unnecessary or avoidable flush is worth preventing.
First, any throwing stuff down the toilet game in which the object is to flush water unnecessarily should be avoided. People who want to flush that tampon or sanitary napkin or even that cockroach invariably want to flush like this, so be on the lookout and educate.When using the toilet for bladder and bowel movements – number 1 and 2s respectively, be mindful of number 2s can linger longer and accumulate from occupants than number 1s.When using watering systems and pools, be mindful of any excessive wastage and unnecessary splash that they might cause, and turn them off when aren’t in use. (Image outside Mrs Leser’s home)
Finally, maintain a relatively eco water level in dishwashers, low enough so that normal activity doesn’t consistently waste water unnecessarily for a few items.
If you follow the advice given here, you will save water in your building and, as a result save money, one drop at a time.
As a result of working with me, women and their families thrive, work places and their personnel prosper, mouldy and chemical / electrical sensitive occupants heal. They’re healthier, they’re alert, they’re happier, more relaxed, more productive, and enjoying life.
Together we bring about healthy indoor environments and create rooms that provide calmness, healthy sleep, relaxation and restored energy for you and your family, create workplaces that provide ideal personnel attendance and elevated productivity.
By returning indoor spaces to more natural conditions, we strengthen you and your family and your personnel’s mind, body and spirit. It’s nice that it also sustains our planet’s ecology, you’d agree.
You can find my latest enterprises by clicking here: http://www.linkedin.com/in/carolparr
The post 12 Money Saving Tips for your Home appeared first on Mitey Fresh Building Biology.